Taiwan padlock machines, key cutter machine manufacturers. We are a leading manufacturer able to offer the high quality key bitting machines in order to meet customers’ demands. ♦ Instruction: This machine is designed for drilling and cutting European Profile Cylinders (EPC) within four servo motors in sequence: cutting the length, drilling on both sides, milling a slot in the center, and facing double sides of inner holes. After all processing, the EPC gets back to the original position and the driller makes a chamfer on the opposite side of M5 screw hole, then it is pushed out into a box. ♦ Function Loading Position (it also makes a chamfer on the opposite side of M5 screw hole.): The maximum manual loading number of Euro Profile Cylinders (EPC) is 20. After loading, the machine makes them in position one piece a time by cylinder then the EPC is drilled and cut within four servo motors in sequence. After processing within four servo motors, the EPC gets back to the original position meanwhile the driller makes a chamfer on the opposite side of M5 screw hole. After all above, the EPC is pushed out into a box. The first-position: Length cutting on both sides The first-position servo motors cuts the length of an EPC precisely, one of the first-position servo motors is fixed as a basic point which controls alterations of the length. The second-position: Drilling on both sides The second-position servo motors drill a hole on double sides of EPC. They also can drill a hole with different depth. The third-position: Milling a center slot The third-position hydraulic press mills a slot in the center of an EPC. It also can mill a slot in the center with different length. M5 screw hole drilling, tapping and facing One servo motor makes chamfers on both inner sides of an EPC and also facing them; the other servo motor drills and tapping M5 screw hole.
Operation panel: M.M.I. ( man -machine interface) touch sensitive panel High efficiency and labor-saving Dust collecting device and defect indicator Cycle time: 8 secs/1 piece
Operation panel: M.M.I. ( man -machine interface) touch sensitive panel High efficiency and labor-saving Dust collecting device and defect indicator System can detect the barrel face direction automatically and reject the bad parts. Cycle time : 10 seconds/ 10 pieces